How to Make Wax Melts with Essential Oils: A Complete Guide

Wax melts are one of the most popular home fragrance products in the UK - quick to make, easy to sell, and beloved by customers who want a flameless alternative to candles. Making wax melts with pure essential oils elevates them significantly above mass-produced synthetic alternatives and allows you to create a genuinely premium product. This guide covers everything you need to know.

Why essential oils can feel weaker in wax melts

If your melts smell weaker than expected, it's rarely a sign you've chosen the wrong ingredient. Essential oils are volatile by nature — that's what makes them smell so good at room temperature — but top-note-heavy oils (citrus especially) evaporate off quickly once wax is melted and held at temperature. A scent that's strong in the bottle can fade fast in a warmer. This is a fixable formulation issue, not a quality problem with the oil: it usually comes down to one of fragrance load, wax choice, or oil selection, covered below.

What are wax melts?

Wax melts are small pieces of scented wax designed to be melted in an electric or tea-light wax melt burner. Unlike candles, they have no wick - the fragrance is released purely through the heat of the burner melting the wax. They are popular because they are safer than candles (no open flame with electric burners), cost-effective for customers, and allow easy scent switching.

What wax to use for wax melts

Soy wax is the most popular choice for natural wax melts. It has a lower melting point than paraffin, gives a clean and long-lasting scent throw, and appeals to eco-conscious buyers. Coconut wax and rapeseed wax are also popular alternatives, or a blend of coconut and rapeseed for a natural, creamy melt — both hold essential oils well thanks to their lower melt point and slower release. Avoid paraffin if you are marketing your melts as natural or eco-friendly.

Essential oil usage rates for wax melts

Wax melts can carry a higher fragrance load than candles because there is no wick to worry about. A fragrance load of 8 to 10% is standard, with some makers going up to 12% for a particularly strong scent throw — noticeably higher than the 6 to 10% typical for candles, since a wax melt is designed to be reheated repeatedly rather than burned once. If you're currently working at candle-strength percentages in your melts, raising the load rate is often the whole fix. Always check the IFRA certificate for your specific oil or blend - some essential oils have maximum permitted usage levels that may affect your formulation.

All our essential oil blends come with IFRA certificates and CLP documentation at standard wax melt usage rates.

The best essential oil blends for wax melts

Strong throwers

The best performing oils in wax melts are those with higher flash points and complex base notes that survive the low heat of a wax melt burner over repeated melt cycles — far better than pure top notes. Our top performers are Forest, Earthy Tones, Amber Woods, Wellbeing Sleep and Gingerbread House, all giving excellent hot throw in soy wax at 8 to 10%. Love Me Tender (a floral with a grounding ylang ylang base) and Day at the Spa also hold their throw well past the first melt, and Gobstopper's punchy aniseed profile cuts through nicely at higher load rates.

Seasonal and gift collections

Wax melts are ideal for seasonal collections. Our Christmas range of Gingerbread House, Christmas Fireside and Candy Cane are consistently our most popular seasonal oils for melt makers. For spring and summer, Flower Garden, Lemonade and Sea Mist perform beautifully.

Wellbeing collections

The wellbeing trend in home fragrance continues to grow. Positioning your wax melts as mood-supporting rather than simply decorative adds significant perceived value. Our full Wellbeing range - Sleep, Uplifting, Anxiety, Vision and Pure - is ideal for a wellbeing-focused melt collection.

How to make wax melts step by step

  1. Melt your soy wax in a double boiler or dedicated melting pot until fully liquid.
  2. Remove from heat and allow to cool to around 65 degrees Celsius — mixing in while fully melted but just off the boil protects the top notes from burning off before the melt has even set.
  3. Add your essential oil blend at the chosen percentage and stir thoroughly for two minutes.
  4. Pour into your melt moulds - clamshells, snap bars or shaped moulds all work well.
  5. Allow to cool and set fully at room temperature - do not refrigerate as this can cause cracking.
  6. Once set, pop out of moulds, label with CLP information and package for sale.

Test before you scale

Always test a new blend and load rate in a small batch first, and let it cure for at least 48 hours before judging the throw — scent continues to bind to the wax after pouring. EOB essential oil blends are available from 10ml so you can test cheaply before committing to a bulk order.

CLP labelling for wax melts

If you are selling wax melts, CLP labelling is a legal requirement. Your label must be calculated at the specific percentage of fragrance used and include hazard pictograms, allergen declarations and a UFI code. All our essential oil blends come with CLP documentation to support your compliance.

Browse our full range of essential oils for wax melt making here.

Get 15% off your first order

Join our list for blending tips, UK compliance updates and offers, then use code BLOG at checkout on your first order.

Code BLOG is for first orders only. Candle makers, soap makers and retailers: see our wholesale range or ask about a custom blend.

Back to blog

Leave a comment